SFuse is designed to protect the on-board power supply system in the model and increase the receivers immunity
to interference that may be communicated via the signal wires. Sfuse is connected between the servo and the
receiver, on each servo in the model.
SFuse not only protects the receiver and power system, but also offers other advantages appreciated in models
with gasoline engines, where there is a lot of interference, and in models with longer power cables. SFuse is great
when you are using fast servos that need additional capacitance on power supply.
SFuse 6A is based on a resettable polymer fuse that is rated for a continuous current up to 6A and a pulse
current is up to 50A. Today's servos do not generally reach such high current values and therefore the fuse is
activated only in case of servo failure.
SFuse contains an amplifier for servo pulse which stabilizes the voltage level of the servo signal to 5V output.
Increasing the range between logical levels increases the immunity to interference from external sources.
The signal amplifier is further equipped with an input servo signal filter which filters out interference and
unwanted signals that are transmitted over the wires to the servo. The amplifier is unidirectional and does not
transmit further interference from the servo back to the receiver.
More information (links):
* Instruction Manual (pdf.)
* Click Here for Firmware Updates
6A Continues/50A Peak
5V to 8.4V (Max 10V)
23mm x 8mm x 6mm