The JetiBox Profi is designed to be an easy to use mobile wireless device for viewing, processing and
storing your telemetry data or for programming JetiBox compatible equipment. The JetiBox Profi also is
designed to work in two different wireless modes with the Jeti Duplex 2.4GHz systems. In Monitor mode it
can only receive its data by "listening" to the existing connection between a Duplex 2.4GHz equipped
transmitter (or transmitter with Duplex module) and a Duplex receiver. In Telemetry mode it receives its
data directly by "listening" to the existing Duplex 2.4GHz receiver and installed sensors or telemetry
equipped ESCs like Jeti Mezon.
JetiBox Profi can be used in Standalone Telemetry mode only with R4US, R5US, R6US, R7-9-11US, R14-18US
Receivers running Version 3.11 of the Rx firmware.
Telemetry Functions & Alarms
All of the telemetry screens have been updated to support the latest Duplex EX sensors. You can
display up to 20 different telemetry parameters on 5 different desktop screens and also monitor the
output of up to 16 transmitter channels.
In addition to monitoring telemetry in real-time, you are
able to record telemetry data for review after the flight. You can then view the logged data using the
Jeti Graphics Flight Monitor Interface. Another cool set of function are the programmable alarms.
This has proven to be a bulletproof way of enhancing safety for both yourself and your model. You can
simply set a receiver battery capacity alarm for the desired capacity used and once that number is
reached the system acoustically and visually gives you warnings.
The JetiBox Profi can work as a parallel wireless monitoring device for your telemetry digital data
stream with the Jeti DC/DS-16 2.4GHz Duplex radio system. This allows all of your telemetry data to be
safely monitored by your co-pilot while you are flying your model. We think this is one of the best ways
to both fly your model and safely monitor your telemetry data.
Sensor and Jeti ESC Programming
All Duplex EX telemetry sensors can be directly plugged in or wirelessly connected to JetiBox Profi for
programming and data viewing. Also, the entire line of Jeti SPIN and Mezon ESCs can be directly
programmed using the JetiBox Profi.
The JetiBox Profi is designed to be an easy to use mobile 2.4GHz wireless device for viewing,
processing and storing your telemetry data and/or for programming your JetiBox compatible SPIN/Mezon
ESCs and Telemetry Sensors.
More information (links):
* Instruction Manual (.pdf)
* Instruction Manual Esprit Model Updated (.pdf)
* Click Here for Firmware Updates
- Frequency Hoping 2.4GHz Digital Data Stream
- Jeti Duplex Compatible with Integrated RF Module
- Data Storing, Audible Alarms, Graphic Telemetry
- Jeti SPIN/Mezon ESCs and Duplex Telemetry Programmer
- 2GB Internal Memory, Internal Li-polymer Battery Pack
- Backlit 128x64 LCD Display
- Built-In Speaker and 3.5mm Headphone Jack
- Programmable Sounds and Alarm Capabilities
- Mini USB for upgradable firmware, Charging and PC data download
Jeti Flight Monitor Graphic Interface
More information (links):
* Click Here for Latest Free Software
You can see battery capacity alarm activated. ProfiBox Profi will program all Jeti Duplex Sensors.
You can see displayed actual Receiver Voltage and Variometer. Especially helpful for soaring sailplane models.
Capacity, Voltage, Run Time
You can see displayed Battery Capacity (mAh), Battery Voltage (V), Current (A) and Motor Run Time.
GPS Coordinates, Time
You can see displayed GPS Coordinates, GPS Satellite Count and Local Time Stamp.
Voltage, Signal, Temperature
You can see displayed actual Receiver Voltage, Receiver Antenna Signal Strength and Temperature in Celsius or Fahrenheit.
Jeti Remote 2.4GHz Receiver
Any Jeti Duplex 2.4GHz receiver can be used with JetiBox Profi for standalone Telemetry.